FlightScope Mevo +

 
AVR FW Writing
FW Writing
Mevo FAQ's

General Info:

The Mevo+ is a consumer 3D Doppler Tracking radar with the following:
  • Built-in camera for alignment purposes
  • No self leveling feet - the body rests on the surface with the rear leg pulled open
  • Simulator Angle stencil to get the Mevo+ in the correct angle for simulation
  • Off the shelf rechargeable batteries
  • WiFi Connectivity
  • Micro USB Charging - Support port
Battery Info:
  • Rechargeable type 18650 battery
  • 3500mAh
  • 3.6V
  • 8-10A

Status Indicators:

State Color Image
Armed (Ready to Measure) Red
Triggered White
Standby/td> Green
Sleep Blue
Off
Booting (AVR) Flashing Blue (`1s)
Booting (Pi) - Power on Blue
Booting (Pi) Flashing Green/Blue
Shutting Down Flashing Yellow/Blue
Support Mode Flashing Blue (USB Cable Connected)
Charging Mode Flashing Blue (USB Cable Connected)
Booting (AVR) Flashing Yellow (fast) - (Firmware Error)
Battery Empty Flashing Red
   

Communication Indicators:

Status Colour Image
Communication Error Yellow
Communication Active(TCP Socket connected) Green
Ready for Communication Blue

Battery and Charging Indicators:

Color Status Image
1 – Flashing Blue Charging 0 - 35%
Charging 25 - 49% 1 – Blue, 2 – Flashing Blue
Charging 50 - 74% 1,2 – Blue, 3 Flashing Blue
Charging 75 - 100% 1,2,3 – Blue, 4 Flashing Blue
Charging Done 1,2,3,4 – Blue
Charging Error 1,2,3,4 – Flashing Yellow
Battery is too hot or cold or battery is not connected correctly.
Battery Status 75-100% 1,2,3,4 – Green
Battery Status 50 - 74% 1,2,3 – Green
Battery Status 25 - 49% 1,2 – Yellow
Battery Status 10 - 24% 1 – Red
Battery Status 0 - 9% 1 – Flashing Red