FlightScope Mevo +

 
Mevo FAQ's

General Info:

The Mevo+ is a consumer 3D Doppler Tracking radar with the following:
  • Built-in camera for alignment purposes
  • No self leveling feet - the body rests on the surface with the rear leg pulled open
  • Simulator Angle stencil to get the Mevo+ in the correct angle for simulation
  • Off the shelf rechargeable batteries
  • WiFi Connectivity
  • Micro USB Charging - Support port
Battery Info:
  • Rechargeable type 18650 battery
  • 3500mAh
  • 3.6V
  • 8-10A

Status Indicators:

StateColorImage
Armed (Ready to Measure)Red
TriggeredWhite
Standby/td>Green
SleepBlue
Off
Booting (AVR)Flashing Blue (`1s)
Booting (Pi) - Power onBlue
Booting (Pi)Flashing Green/Blue
Shutting DownFlashing Yellow/Blue
Support ModeFlashing Blue (USB Cable Connected)
Charging ModeFlashing Blue (USB Cable Connected)
Booting (AVR)Flashing Yellow (fast) - (Firmware Error)
Battery EmptyFlashing Red
   

Communication Indicators:

StatusColourImage
Communication ErrorYellow
Communication Active(TCP Socket connected)Green
Ready for CommunicationBlue

Battery and Charging Indicators:

ColorStatusImage
1 – Flashing BlueCharging 0 - 35%
Charging 25 - 49%1 – Blue, 2 – Flashing Blue
Charging 50 - 74%1,2 – Blue, 3 Flashing Blue
Charging 75 - 100%1,2,3 – Blue, 4 Flashing Blue
Charging Done1,2,3,4 – Blue
Charging Error1,2,3,4 – Flashing Yellow
Battery is too hot or cold or battery is not connected correctly.
Battery Status 75-100%1,2,3,4 – Green
Battery Status 50 - 74%1,2,3 – Green
Battery Status 25 - 49%1,2 – Yellow
Battery Status 10 - 24%1 – Red
Battery Status 0 - 9%1 – Flashing Red