Indoor Setup of FlightScope
Setup instructions for the Xi, Xi +, Xi Tour, X2 and the X2 Elite
Short Indoor Mode: The distance from the tee to the FlightScope sensor should be exactly 8 feet. For the most accurate measurements in this setup, there must be at least 8 feet of ball flight.
Indoor Mode: The distance from the tee to the FlightScope sensor should be 11 feet. For the most accurate measurements, there must be at least 13 feet of ball flight.
Please ensure that there are no obstructions between the FlightScope sensor and the tee. Ideally, fluorescent lights should be avoided; incandescent, halogen or sodium lights are acceptable. If the location has fluorescent lights, aluminium insect screens available from any hardware store (Lowe's or The Home Depot) can be used to shade the lights.
Metal Stickers for Direct Spin Measurement (indoor only)
Due to the short ball flight distance in an indoor golf swing simulator set up, FlightScope requires that the ball be marked with a metal sticker to get accurate spin readings. Only one sticker is required per ball. The golf ball is placed with the sticker facing the screen, away from the clubface.